2019 01 : It’s always nice to cut as many parts as possible before starting the assembly. That way, you can set aside the dust mask, safety glasses and hearing protection for longer periods of time, and the air isn’t continually filled with sawdust. Cut everything except the lengths of the drawer components. In case things get a little out of whack during assembly, you’ll be able to measure and fit the drawers to the actual openings.Learn how to build a door using the traditional cope and stick joint. This joint has been around for a long time and is easy to produce with hand or power tools. This download will teach you how to prepare the stock and machine the joinery, and show you how to build a door that will last.Gather the materials for the garage workbench using the complete Materials List that you’ll find in ‘Additional Information’ below. Then cut the 3/4-in. plywood parts to size following the Cutting List and Cutting Diagrams that you’ll find below and also in ‘Additional Information.’ Cut a 15-in. x 8-ft. strip out of the 1/4-in. plywood to use as drawer bottoms. The leftover is the perfect width for the back (E); it just needs to be ripped down to length. Don’t cut the drawer fronts until after the workbench carcass is assembled.This free download from Popular Woodworking is your guide to essential cabinet making techniques. We’ve put the most important information about building cabinets into this PDF, to give you the skills you need for all kinds of cabinet projects.We’ll always want to have as much radial edge facing our plane’s sole as possible. This can create short grain but that helps add to the curl of the shaving.